吊扇安装前的准备
Preparation of the ceiling fan before installation
1、其型号、规格必须符合设计要求。
1. The model and specifications must meet the design requirements.
2、有吊杆时应考虑吊杆长短、平直度问题，并有产品合格证
2. The suspender length and straightness should be considered when there are suspender.
3、吊扇的各种零配件是否齐全。
3, the various parts of the ceiling fan are complete.
4、扇叶有无变形和受损现象。
4, the fan leaves have no deformation and damage.
5、吊杆上的悬挂销钉必须装设防震橡皮垫及防松装置
5. Suspension pins must be equipped with shock proof rubber pads and loosening devices.
吊扇安装时的操作
Operation of ceiling fan installation
将吊扇托起，并把预埋的吊钩将吊扇的耳环挂牢。然后接好电源结头，注意多股软铜导线盘圈涮锡后进行包扎严密，向上推起吊杆上的扣碗，将结头扣于其内，紧贴建筑物表面，拧紧固定螺丝。
Lift the ceiling fan and hang the earring of the ceiling fan with the embedded hook. Then the power junction head is attached, and attention is paid to the tight binding of the soft copper wire plate ring after rinsing tin, the bowl on the hanger is pushed up, the knot head is buckled inside it, the surface of the building is clung to the surface of the building, and the fixed screw is tightened.